Product Overview
12 Volt Negative Ground Electric Engine Oil Temperature Gauge, 150 to 350 Degrees Fahrenheit
Condition
Unused new old stock. No box, come as shown. Markings legible: ENGINE OIL TEMP, 150, 200, 250, 300, 350, 100, 150 and SW on the dial; 465-DY, 82706, 57793, 12V + NEG. GND., OIL TEMP GAUGE, ASSEMBLED IN MEXICO and an INSP 32 stamp on the case label; GND on the case back and GND. on the bracket.
Ready to ship from our Idaho warehouse the same or next business day. Selling online since 1999.
Product Overview
A Stewart Warner 465-DY engine oil temperature gauge for 12 volt, negative-ground systems. The black dial is scaled 150 to 350 degrees Fahrenheit on the outer ring, with 100 and 150 Celsius marks inside it, an oil can and thermometer symbol and a red needle. It sits in a 2-1/16 inch case behind a bright bezel ring.
Key Features
- Scale: 150 to 350 degrees F, with 100 and 150 degree C marks
- Electrical: 12 V, negative ground
- Case size: 2-1/16 inch
- Black dial, red needle, oil can and thermometer symbol
- Threaded rear studs, GND marking and a U-shaped mounting bracket
- Red cap over the center rear stud
Applications
- Adding an oil temperature readout to a dash panel on a 12 volt, negative-ground engine
- Replacing a matching Stewart Warner 465-DY on equipment that already carries one
- Filling an empty 2-1/16 inch gauge opening in an equipment dash
Frequently Asked Questions
What temperature range does it read?
150 to 350 degrees Fahrenheit, with Celsius marks at 100 and 150.
What size case is it?
2-1/16 inch.
Is it a 12 volt, negative-ground gauge?
Yes. It is a 12 V, negative-ground gauge, unused NOS with no box. Flat-rate shipping in the lower 48, and orders over the free-shipping line ship free.
Engine oil from 150 to 350 degrees on one dial, with Celsius tucked inside the scale. Measure your panel opening against the 2-1/16 inch case and the call is yours.