null

Watlow 146E-1109-3000 Temperature Limit Controller 302F 150C RTD Unused

Watlow

$95.00
SKU:
P26076
Condition:
New
Adding to cart… The item has been added

Product Overview

Watlow Series 146 Fixed Setpoint Limit Controller 120VAC 100-Ohm RTD

Condition

Unused new old stock (NOS). Markings legible: 146E-1109-3000 S/N: 023384, 120 VAC, 10 VA 50/60HZ, TYPE: 100Ω RTD, FIXED AT 302°F / FIXED AT 150°C. Includes original Series 146 User's Manual sealed in clear plastic bag. Verify suitability before use.

Ships same or next business day from our Idaho warehouse. Honest pricing, no nonsense.

Online since 1999. We are here for our customers, with a no-hassle satisfaction guarantee.

Product Overview

Dedicated high-limit temperature controller engineered for thermal process safety shutoff. Factory-configured with a tamper-proof fixed setpoint of 302°F (150°C), it accepts standard 100-ohm platinum RTD sensor inputs to monitor heating zones, ovens, and liquid baths. When process temperatures exceed the 150°C threshold, the internal 8A Form C electromechanical relay de-energizes to interrupt the heater circuit, latching the front red Alarm indicator until manually cleared via the front blue button or wired remote reset contacts.

Key Features

  • Fixed setpoint: Factory set at 302°F (150°C) to prevent unauthorized adjustment
  • Sensor input: 100-ohm RTD (supports 2-wire or 3-wire connections on terminals 10, 11, and 12)
  • Operating power: 120 VAC nominal, 50/60 Hz, 10 VA power consumption
  • Limit output: 8 A Form C SPDT electromechanical relay rated up to 240 VAC / 28 VDC resistive
  • Front panel controls: Red Alarm LED and blue integral manual Reset pushbutton
  • Remote reset capability: Dedicated terminals 13 and 14 for external pushbuttons
  • Agency approvals: FM Approved, cURus, CE marked for industrial limit control
  • Mounting options: Subpanel screw tabs or integrated rear 35mm DIN-rail channel

Applications

  • Installs in curing ovens and environmental test chambers as a dedicated thermal safety cutoff
  • Protects laboratory wash tanks, heated baths, and industrial immersion elements against dry-fire conditions
  • Adds an independent hardware-level overtemperature trip to DIY kiln, smoker, or reflow plate builds
  • Mounts onto control panel DIN rails to replace obsolete Watlow Series 140/141/146 fixed-setpoint units

Frequently Asked Questions

Can the trip temperature on this limit controller be altered in the field?

No. The 146E-1109-3000 is factory fixed at 302°F (150°C). It contains no external dials or dipswitches, providing tamper-resistant high-limit protection.

What type of temperature sensor must be connected to this module?

This controller requires a 100-ohm platinum RTD sensor wired across terminals 10, 11, and 12. It does not accept thermocouple inputs.

How is the alarm cleared after an overtemperature condition occurs?

Once the process temperature drops below the 302°F setpoint, press the blue Reset pushbutton on the front faceplate, or close an external momentary switch wired across screw terminals 13 and 14.

What mounting options are supported on the Series 146 enclosure?

The unit features an integrated rear channel with a locking latch designed to snap directly onto standard 35mm DIN rails, as well as corner mounting ears for direct panel screw attachment.

Factory-locked at 302 degrees so nobody tweaks the threshold on third shift. Clip it to the rail, land the RTD, and let your heating loop run safe.

Reviews

(No reviews yet) Write a Review