Product Overview
Ten Meter M12 Four-Pin Straight Cordset with Loose Leads for PZ-G Photoelectric Sensors
Condition
Unused, new old stock, never installed and in clean condition. The cable remains in the manufacturer’s packaging, which shows minor signs of handling from storage only. Bag label legible: KEYENCE, OP-85502, MADE IN JAPAN, KEYENCE CORPORATION, Osaka, Japan. The cable pictured is representative of stock.
Ships same or next business day from our Idaho warehouse. Selling online since 1999.
Product Overview
A PZ-G sensor takes its power and signal through an M12 socket, and this cordset carries that connection 10 m back to the panel. The sensor end is a straight M12 4-pin connector and the far end is loose wires, ready to land on terminal blocks. OP-85502 is one of the connector cables offered for the Keyence PZ-G series of self-contained photoelectric sensors.
Key Features
- Straight, molded M12 4-pin connector with a metal coupling on the sensor end
- Loose wire leads on the cable end
- 10 m (32.8 ft) length
- PVC cable
- Made in Japan, as marked on the bag label
Applications
- Replacing a cut or crushed cordset on a PZ-G sensor along a conveyor or packaging line
- Running an added PZ-G sensor back to a control panel up to 10 m away
Frequently Asked Questions
Does the far end have a connector?
No. It ends in loose wires for terminal blocks or a junction box.
Is the M12 connector angled?
No. It is a straight connector.
Will it plug into a PZ-G sensor with an M12 socket?
Yes. The sensor end is a straight M12 4-pin connector, and OP-85502 is a connector cable for the PZ-G series. Flat-rate shipping in the lower 48, and orders over the free-shipping line ship free.
Ten meters of cable sits coiled under one small label that reads OP-85502. Measure the run from sensor to panel and see whether it reaches.
