Product Overview
1/2 Inch ID Fuel and Engine Hose, 1750 PSI, Made Up 14 Inches Long With Swivel Nuts at Both Ends
Condition
Unused, new old stock, clean and in excellent condition. Each assembly is 14 inches long with a female 3/4 inch swivel JIC fitting at each end. Hose print legible: AEROQUIP FC300-10.
Selling online since 1999. It ships from our Idaho warehouse the same or next business day.
Product Overview
FC300 is the blue engine and fuel hose in the Aeroquip line, now sold under Danfoss PowerSource, and the -10 size has a 1/2 inch inside diameter. It is rated 1750 psi working pressure from -58 to 302 F, with air service not to exceed 250 F. A three-ply fabric braid reinforces it under a polyester cover, and its minimum bend radius is 5.5 inches. The pictured assembly is representative.
Key Features
- Hose FC300-10: 1/2 inch ID, 0.92 inch OD
- 1750 psi max working pressure, 7100 psi burst
- Temperature range -58 to 302 F; air not to exceed 250 F
- Chlorinated polyethylene (CPE) tube, fabric three-ply braid reinforcement, polyester cover
- 5.5 inch minimum bend radius
- 14 inch assembly with a female 3/4 inch swivel JIC fitting at each end
Applications
- Replacing a short fuel line on a generator, pump skid or engine already plumbed with -10 hose
- Keeping a made-up spare for a fuel or engine circuit that uses FC300
Frequently Asked Questions
What fluid is it built for?
Fuel. Air service is limited to 250 F.
What is the working pressure?
1750 psi.
Is this the 1/2 inch ID size of FC300?
Yes. The cover prints FC300-10, the 1/2 inch ID size, and calipers across the outside of the hose should read 0.92 inch. Flat-rate shipping in the lower 48, and orders over the free-shipping line ship free.
The -10 printed along the blue cover is the number that matters at the parts counter. Match it to the print on your old line, and the size question is settled.
