Product Overview
Digital Torque Wrench to 25 Ft-Lb, 300 In-Lb, 34 N·m, Fitted with a 1-1/2 Inch Open-End Head
Condition
Used; it powers up, basic functional testing has been performed, and from inspection it appears in good shape. Four AA rechargeable NiMH batteries are included, and a charger is not included. Sold as one wrench with its open-end head stamped OE 1-1/2, 4800, 1-15. Markings legible: STURTEVANT RICHMONT, Exacta 2, 25 FT.LB, 300 IN.LB, 34 N.M, MADE IN USA, U.S. PATENTS, the crossed-out wheeled bin symbol, and a calibration tag reading NRF Limited Cal, Cal: 3-Jul-2017, Due: 3-Jan-2018.
Ships from our Idaho warehouse the same or next business day. We've been selling online since 1999.
Product Overview
An electronic torque wrench in the Exacta 2 line: a long shaft with a digital display and keypad near the grip and an interchangeable head at the far end.
Key Features
- Capacity marked 25 FT.LB, 300 IN.LB and 34 N.M
- Display reads in FT.LB and Nm, with readouts labeled TARGET, RESIDUAL, PEAK and STORED
- CLEAR and SELECT keys with up and down arrows, marked DATA RECORD
- Head stamped OE 1-1/2: a 1-1/2 inch open-end head
- Shaft label: "Common Center Length (CCL) heads used on this torque wrench MUST be 3.875"."
- Runs on AA rechargeable NiMH cells
Applications
- Replacing an Exacta 2 on a line that already stocks 3.875 inch CCL heads
- Torquing fasteners that take a 1-1/2 inch open-end head, up to 25 ft-lb, after a calibration
- Reading peak and residual torque on existing joints during a quality audit, once calibrated
Frequently Asked Questions
Is a charger included?
No. The four AA NiMH cells come with it, and a charger is not included.
Will other heads fit this wrench?
Yes, when the head is a Common Center Length (CCL) head of 3.875 inches. A head of another center length does not match this wrench.
Which units does the display show?
FT.LB and Nm, both printed beside the readout.
Does this wrench ship ready for certified torque work?
No. It powers up and basic functional testing has been performed, but its calibration tag reads Due: 3-Jan-2018. You get the wrench with its OE 1-1/2 head and four AA NiMH cells; you take on a fresh calibration and a charger. Flat-rate shipping in the lower 48, and orders over the free-shipping line ship free.
The tag says this wrench was due back at the cal lab in January 2018, and it still wakes up reading 0.000. Send it for a calibration and see what it remembers.
