Product Overview
Code 62 Four-Bolt Flange Clamp Kit for 1 Inch (-16) Ports, Halves, Bolts, Washers and O-Ring
Condition
Unused new old stock in its original Eaton Weatherhead bag, opened to photograph the contents. Bag label legible: Weatherhead SFK62-16, QTY 1, R316AD, UPC 725975017241. Contents: two yellow zinc-finished clamp halves, four zinc-plated hex head bolts, four split lock washers and one O-ring.
Ships same or next business day from our Idaho warehouse. Selling online since 1999.
Here for our customers, with a satisfaction guarantee that means what it says.
Product Overview
At 1 inch, the SFK62-16 clamps a Code 62 flange head to its port. The two halves capture a Code 62 flange head and the four bolts draw it down onto the port, with the O-ring sealing the face. Code 62 is the higher-pressure series of the SAE J518 four-bolt flange, and at this size its port takes 7/16-14 bolts where a Code 61 port takes 3/8-16, so the two do not interchange.
Key Features
- SAE Code 62 split flange, 1 inch (-16) size
- Two clamp halves, yellow zinc finish
- Four zinc-plated hex head bolts
- Four split lock washers
- One O-ring for the flange face
- Bag label UPC 725975017241
Applications
- Mounting a 1 inch Code 62 flange head hose fitting or adapter to a pump outlet
- Re-making a pressure-line joint with fresh matched hardware after a hose failure
- Stocking a complete kit for a machine whose ports are 1 inch Code 62
Frequently Asked Questions
Will this kit fit a Code 61 port?
No. A 1 inch Code 62 port spaces its bolts 2-1/4 inch across the long side of the pattern; a Code 61 port of the same size measures 2-1/16 inch. The Code 62 port is tapped 7/16-14; the Code 61 port takes 3/8-16.
Is the flange head fitting included?
Not included. The kit holds a flange head fitting or adapter to the port; the fitting is sold separately.
Can I reuse my old O-ring?
The kit includes one O-ring, so the joint can go back together with a fresh seal. Flat-rate shipping in the lower 48, and orders over the free-shipping line ship free.
A 1 inch Code 62 port is where the big pressure leaves the pump, and the joint is only as good as the clamp around it. Measure the bolt spacing, then let this kit do the holding.
